NOTE: This Article is for resetting the E-Lite, E-Lite 450 and newer BB Series Radios with the Power LED Strip.
If you are having issues with your ENCOM Broadband Radio you can perform a factory reset on the device. This will set the Radio back to the default settings.
** IMPORTANT **
Before resetting your Radio, make sure that you make a note of your Radios settings or that you have exported its configuration profile and saved it on your computer.
To reset your ENCOM Radio, follow the steps below
1. Remove the Ethernet cable from the ENCOM Radio.
2. Once cable is removed, press the RESET button located on the back of the radio.
3. With the RESET button still pressed, plug in the Ethernet cable back into the ENCOM Radio and hold for 2 minutes.
NOTE: A series of beeps will come from the Radio, this is normal. This is the Radio telling you that it is initializing the reset process.
4. After 2 minutes have passed, remove your finger from the RESET button.
Your ENCOM Wireless Radio has been reset to the factory defaults.